ODE常開電磁閥原理,好ODE常開電磁閥
常開電磁閥是一款電磁閥，其特點為線圈通電時電磁閥關閉，
線圈斷電后電磁閥開啟，管路中的電磁閥長期開啟，偶爾關閉的時候應該選用常開型。
at the moment of installation and inspection testing,
with the adjustment screws in the fixed core: any modification of
this taring may make the valve work in a different way with
regard to the data shown on the label.
特點及選用
注：另一種情況是電磁閥帶電長期開啟，可以用控制模塊防止常閉型電磁閥線圈過熱燒毀。
另一種情況是電磁閥長期開啟長期關閉，可以用雙穩態型電磁閥，即給電開啟電磁閥后即斷電，
此時電磁閥保持開啟狀態，關閉時需要再次給電電磁閥才會關閉。

ODE常開電磁閥原理,好ODE常開電磁閥
causes a reduction in the pressure
required to open the valve: if the pressure difference between
inlet and outlet is greater than the maximum value for which the
solenoid valve has been tared, the latter may open even when
the coil is not energized. Proportional solenoid valves are tared
individually,
電磁閥具有入口管和出口管。 安裝有密封墊圈的柱塞，直接提供打開和關閉主孔電磁閥。
不同于只有2路常閉電磁閥兩種狀態，開和關，比例電磁閥，in圈中電流運行的功能可以部分打開。
該電磁閥可以用這樣的調節螺絲設置圈沒有通電的情況下，
zui大限度地了*的密封項目壓力得到。
On these valves, unlike the other models, the fluid shall enter
into the valve so to pass through the main orifice from the lower
side towards the higher one.
In this family of solenoid valves an increase in pressure, as with
three way solenoid valves,
關于用于激勵和控制的方法的澄清這種電磁閥見功能方案對于本節中的這些閥門。
重要的是注意比例電磁閥是始終由直流（DC）操作。

,好ODE常開電磁閥